1.로딩 로고 관리
아래이미지는 로고이미지입니다.
이미지에 마우스 오버하여 편집버튼클릭후, 속성탭에서 이미지를 변경 해주세요.

  • 로딩이미지.  
  • 1.로고 관리
    아래이미지는 로고이미지입니다.
    이미지에 마우스 오버하여 편집버튼클릭후, 속성탭에서 이미지를 변경 해주세요.

    2.카테고리 하위 이미지 관리
    아래이미지들이 메인이미지입니다.
    변경원하는 이미지에 마우스 오버하여 편집버튼클릭후, 속성탭에서 이미지를 변경하거나 링크를 연결해주세요.
    링크를 연결하고 싶지않다면 링크기입란에 #(샵기호)를 기입해주세요.

    2.메인 이미지 관리
    아래이미지들이 메인이미지입니다.
    변경원하는 이미지에 마우스 오버하여 편집버튼클릭후, 속성탭에서 이미지를 변경하거나 링크를 연결해주세요.
    링크를 연결하고 싶지않다면 링크기입란에 #(샵기호)를 기입해주세요.

  • PC 사용이미지입니다.
  • MO 사용이미지입니다.
  • 2.메인이미지 관리
    아래이미지들이 메인이미지입니다.
    변경원하는 이미지에 마우스 오버하여 편집버튼클릭후, 속성탭에서 이미지를 변경해주시기 바랍니다.

  • 메인1번이미지입니다.
  • 메인2번이미지입니다.
  • 3.SNS 관리
    아래이미지들이 SNS입니다.
    링크를 연결할 아이콘에 마우스 오버하여 편집버튼클릭후, 속성탭에서 링크만 연결해주세요.
    링크를 연결하고 싶지않다면 링크기입란에 #(샵기호)를 기입해주세요(자동 사라집니다.)

  • FAQ

    Title

    Q) How to use the IMPRINTU temporary tattoo printer

    Posted by Imprintu(ip:)

    Date 2024-03-29 13:48:08

    View 101

    Rate 0points  

    Recommend Recommend this

    Message

    A) 1. Open the device top cover and insert tint palette.
    2. Press the power button on top for two seconds to turn on the device.
    3. Connect your phone and device in the IMPRINTU app.
    4. Search and choose a design in the gallery page and click "IMPRINTU."
    5. Select Skin/Object mode depending on your printing surface.
    6. Click the top button to prepare the device to print.
    7. After the device beeps and the LED turns green, glide the device smoothly across the surface to the direction of the top arrow.
       *Skin Mode : please apply the powder primer on your skin before gliding the device.
    8. To make the design waterproof, apply a tiny amount of balm fixer to the surface that is applied.
    *To find more about how to use the IMPRINTU, go to our website's [How To]->(link: https://imprintu.com/howto/how-to.html)


    Attachment

    Password
    Edit

    Please enter password to remove or edit this post.

    Edit Comment

    Name

    Password

    Message

    / byte

    Edit Cancel
    Password
    OK Cancel